It bramah slot some similarities to a modern tubular pin tumbler lockhowever it used fixed wafers instead of two-part pins. He worked in St Anns Road until he retired in History After attending some lectures on technical aspects of locksBramah designed a lock of his own, receiving a patent for it in An examination of the lock shows that it has been rebuilt since Hobbs picked it.
Not in existence in bramah slot Between the two wars Charles Henry commenced business on his own at 3 Wednesfield Road, one of three houses he had built. In Len Young, within 3 months, designed and launched the current low volume high security range of products, purchased the company.
Bramah lock The Bramah lock is a lock design that was created by Joseph Bramah in He died on In a Bramah key the the slots are cut into the barrel. When his brother left the pub Richard moved into premises belonging to Hargrove Fox qv in Froysell Street, Willenhall.
In the eldest son Benjamin Buggins bramah slot is listed at 9 Clothier Street as a keymaker. In partners were A. Started by Enoch Burns brother of the Willenhall seed merchants. Nothing else known but the company may have a family connection with Thomas Herbert qv. He had two sons, Charles Henry b and Thomas b c The original business was still carried on in Clothier Street by William and Thomas In this lock the two plates are symmetrical.
After a short time Charles decided to bramah slot out on his own again and, joined by his sons Dennis and Fred, they started to make brass cabinet and safe locks, as C H Buggins, in the same premises they had used before the war. On the postsingle spring design the spring is used to reset the lock, raising all the sliders when the key is withdrawn. The safe locks were made in brass with 6, 7, 8 and even 9 lever mechanisms, and in sizes 3" x 3", 4" x 5", and 4" x 6".
They remain at 31 Oldbury Place, London today as manufacturers of Bramah locks, window and door security bolts. The safe locks became the most profitable side of the business and from c work on cabinet locks declined and they concentrated on the safe locks. Today the company is based in Fitzrovia, London and Romford, Essex.
They ran the company as Buggins and Sons, Clothier Street, up to the war in when the business was closed down.
Originally it had 18 iron slides and 1 central spring; it now has 13 steel slides, each with its own spring. They were struck off the company register and dissolved in February From the company was owned by J T Need and Co.
A Gazetteer of Lock and Key Makers
The end of the key had a number of different slots of varying depths, which, when inserted into the lock, would press a number of wafers to a specified depth and enable the key to turn and open the lock. The Great Exhibition The challenge stood for over 67 years until, at the Great Exhibition ofthe American locksmith Alfred Charles Hobbs was able to open the lock and, following some argument about the circumstances under which he had opened it, was awarded the prize.
Bristow, making specialised mortice locks. The lock plate reads just Bramah.
Taken over by H Davenport and Sons by The upper surfaces will be the relative depth of the key slots. They set Dennis up in a lock-making department that was a replica of his shop in Willenhall, and Dennis worked for them, still producing the locks he had always made.
In the same year he started the Bramah Locks company at Piccadilly, London. Bristow were still running the Company. The sliders are made of a folded over piece of steel and not just flat pieces of steel.
The original Bramah lock had 18 different wafers, which allowed for million possible permutations. Bramah slot was followed by his eldest son, John, who was succeeded by youngest son Enoch, who was running the business when Joe Davies worked there from until bramah slot left to join the Royal Navy from to In Bramah became involved in the great lock controversy at the Great Exhibition at Crystal Palace.
The following year Joseph died. Some locks were made with double throw bolts and one or two orders with treble throw. They went into receivership in The end of the key had a number of different slots of varying depths, which, when inserted into the lock, would press a number of wafers to a specified depth and enable the key to turn and open the lock.
I hoped that the two locks were on suite and that by making a key for the main lock which I could take apart it would also fit the lock in the drawer. Hobbs' attempt required about 51 hours, spread over 16 days. Please click on images to enlarge The two plates are symmetrical at this date.
He lived in Number 1 and let out the other two. In this photo I have aligned the slots. The Great Exhibition The challenge stood for over 67 years until, at the Great Exhibition ofthe American locksmith Alfred Charles Hobbs was able to open the lock and, following some argument about the circumstances under bramah slot he had opened it, was awarded the prize.
In later locks the plates are divided differently.
As they became old enough Fred and Dennis served in the forces. In his eldest son, Timothy, joined the business as a partner and the company name was changed to Bramah and Son. In June the business closed down due to lack of work caused by cheap imports and the premises put up for sale and sold.
In Thomas Withers Ltd got into financial difficulties and went into liquidation. He came back to work there after the war for about 18 months before leaving to join Arthur Hough and Sons. Existing in and but not in Run by the brothers Bill, Ernie and Ken Bristow, possibly into the s.
Hobbs' attempt required about 51 hours, spread over 16 days. The premises were later turned, for a short period, into a plating firm. In existence in but not